RC Helicopter Tips

Setting up your RC helicopter has to be done with some time and patients. One thing I like to do is read and re-read the instruction manual of an RC helicopter. There is always something important that I missed.

Make sure you keep these manuals in a safe place where you can access them at any given time.

When you first start building your RC helicopter, you will need to be careful and not try to bypass the building process. If you rush the process, bad things will tend to happen.
For Example, RC helicopter parts flying all over the place while in flight.

The RC heli setup has to be done neat and tidy without any loose wires or loose receivers. These parts can be easily secured to your RC helicopter with wire ties and double sided tape. After the RC heli setup, it is a good idea to have the RC helicopter inspected by a RC helicopter hobby shop or by an RC helicopter pilot. This inspection will insure that the RC helicopter will fly properly.

Also, before your first flight try to find somebody in your local area that is familiar with your radio type that can show you how to set it up. This will save you some frustrations that you might experience if you have a radio that is not set up properly.

On this page I will show you some of the things on RC heli setup, from problems I encountered setting up my RC helicopter to tricks I discovered along the way.

Let me know what you think.

Do you think I'm missing something important? I would appreciate your feedback.