Knowing how to do your RC heli setup for the first time can be very frustrating.
But fortunately there is RC Helicopter Tips .com that can give you the
basics on how to get started.
Setting
up your RC helicopter has to be done with some time and patients. One
thing I like to do is read and re-read the instruction manual of an RC
helicopter. There is always something important that I missed.
Getting familiar with the instruction manual will make the RC heli setup
simpler.
Make sure you keep these manuals in a safe place where you can access
them at any given time.
When you first start building your RC helicopter, you will need
to be careful and not try to bypass the building process. If
you rush the process, bad things will tend to happen.
For Example, RC helicopter parts flying all over the place while in flight.
The RC heli setup has to be done neat and tidy without any loose
wires or loose receivers. These parts can be easily secured to your RC
helicopter with wire ties and double sided tape. After the RC heli setup,
it is a good idea to have the RC helicopter inspected
by a RC helicopter hobby shop or by an RC helicopter pilot. This inspection
will insure that the RC helicopter will fly properly.
Also, before your first flight try to find somebody in your local area
that is familiar with your radio type that can show you how to set it
up. This will save you some frustrations that you might
experience if you have a radio that is not set up properly.
On this page I will show you some of the things on
RC heli setup, from problems I encountered setting up
my RC helicopter to tricks I discovered along the way.
Let me know what you think.
Do you think I’m missing something important? I would appreciate your
feedback.